This site is part of the Global Exhibitions Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 3099067.


Stabilizing Frozen Products


By R.J. Foster, Contributing Editor

Early advances in frozen-food technology likely focused on finding enough snow to cover an entire slab of bronto-ribs.

Fast-forward to 1953. Clarence Birdseye’s research in the realm of liquid freezing technology leads to the introduction of the “TV dinner"–a complete meal right out of the freezer that would redefine the term “convenience" for American consumers.

“We have seen studies that say the global market for frozen food could potentially be worth $226.5 billion by the year 2015," says Maureen Akins, applications manager, TIC Gums, White Marsh, MD. “For frozen-food formulators and packagers, converting repeat business from consumers relies on the quality of the new or reformulated products they sell. Incorporating plans for stability and texture early in the process is the best way for them to proceed as it allows better results, earlier in the process than not."


Water expands when frozen, increasing its volume by 9%, forming crystals that will vary in size and number based on the conditions of their formation. Slower freezing-rates yield fewer, larger crystals. Rapid freezing yields greater numbers of smaller crystals. Small crystals are, however, susceptible to even minor fluctuations in temperature, often melting into free water that then freezes onto other ice crystals, resulting in growth and expansion that can cause both mechanical and chemical effects.

Water within flexible cellular structures throughout a food matrix expands as it freezes, filling once-open spaces with ice. Upon thawing, the water is released and observed by the consumer as syneresis. Rigid structures like those of plant or vegetable tissues are more likely to simply break under the forces of the expanding ice crystals. In this case, visual and textural effects are observed.

Emulsions can be devastated when ice crystals grow within and rupture water droplets dispersed through the fat phase. The result, observed upon thawing, is a broken emulsion. Emulsion stability can also be affected by increases in ionic strength of solutes present in water that has not yet been frozen. Changes in the ionic character of food can permanently destabilize proteins and cause solute crystallization and/or precipitation that will affect finished-product taste and texture. Increases in concentration of certain solutes will also make the product more reactive, i.e., more susceptible to undesirable oxidative changes in taste and color.

Products can continue to undergo changes during frozen storage and transportation because, technically speaking, they are not completely frozen. Pure water freezes at 0° C. Soluble materials such as salts or sugars depress the freezing point by almost 2° C for every added mole (one molecular weight expressed in grams). Food products are complex, containing far more than a mole or two of solutes such as salts, sugars, proteins or fiber. These will affect the temperature at which a food system is devoid of free moisture—the eutectic point. And, unfortunately, most foods’ eutectic points are lower than commercial freezing processes can achieve: around -50° C for meats, -55° C for ice cream, and -70° C for bread.

Despite being “frozen," moisture is still moving. Temperature gradients that arise from fluctuations in temperature can drive water toward cooler temperatures typically found at the surface of a product. While temperature gradients may reverse, water that has found space to collect in product voids and packaging gaps will not return.

Poor or inappropriate packaging can allow moisture to evaporate from the surface into the environment, causing dehydration, known as freezer-burn.

When freezing point is ambiguous, and eutectic point is not feasible, some developers turn to glass-transition temperature, or Tg. This is the temperature at which the product enters a “glassy" state, becoming a non-crystalline solid. When products are stored below the Tg, viscosity of unfrozen liquid is so great that diffusion-dependent effects such as moisture migration, ice recrystallization and surface ice formation are practically halted. Chemical reactions are also brought to a standstill as reactants are no longer able to diffuse into the unfrozen liquid.

Like freezing point, Tg will change with the composition of the product. Low-molecular-weight solutes like sugar will lower Tg. This is an important consideration when formulating. Frozen desserts with high-molecular-weight sweeteners will be more firm than those incorporating low-molecular-weight ones. Using high-fructose corn syrup will yield a spoonable texture at frozen temperature. The resulting depression of Tg can, however, allow ice-crystal growth that will, through storage, ruin the product’s texture.

Super starches

Processors are continually discovering new means of addressing problems before they arise. Rapid freezing, proper packaging and consistent temperatures through transport and storage all help minimize freeze/thaw degradation. Advances in processing technology are matched, though, by a growing number of opportunities to utilize functional ingredients to enhance stability, improve quality and create new offerings altogether.

Starch is one of the most commonly utilized ingredients for improving freeze/thaw stability. With products able to hold upwards of 20 times their weight in water, starches provide cost-effective options for managing moisture while offering opportunities to enhance or modify texture. Starches come in many varieties, though, and no one type is right for every application.

When considering native starches, the highly branched amylopectin in waxy maize makes it a better choice for freeze/thaw stability than corn, potato and tapioca, which are predominantly straight-chain amylose. The branching helps hinder retrogradation, the reassociation of starch chains that leads to syneresis. Native, unmodified starches are not, however, immune to freeze/thaw issues. Concentration effects during freezing can result in undesirable cross linkages that can keep the starch from rehydrating during thawing. Starch granules can also suffer physical damage from ice-crystal growth.

A starch’s freeze/thaw stability can be improved by substitution, creating crosslinks through acetylation or hydroxypropylation. The latter is better for freeze/thaw stability as hydroxypropyl groups can be added at higher levels, creating more branching and more resistance to reassociation. Hydroxypropylation also creates a more open structure that increases viscosity.

« Previous12Next »
comments powered by Disqus